MinkaAire uchiwa Manuale delle Istruzioni Scaricare il pdf (Pagina 19)

Fig. 21

NOTE: Before starting installation, disconnect the power by turning off the circuit breaker or

removing the fuse at fuse box.

Step 1. Remove 1 of 3 screws from the docorative housing and loosen the other 2 screws. (Do

not remove)

2. Raise and hold the light plate close to the docorative housing and proceed to do the wire

connections. Connect the white wire connectors from the light plate and fan, follow the same

procedure with the black wire connectors. (Fig. 21)

3. Place the key holes from the light plate over the 3 screws previously loosened from the

docorative housing, turn light plate until it locks in place at the narrow section of the key holes.

Secure by tightening the 2 screws previously loosened and the one previously removed. (Fig. 21)

INSTALLING THE LIGHT PLATE

LIGHT PLATE

CONNECTORS

SCREWS

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Nessun commento

MinkaAire uchiwa Manuale delle Istruzioni Pagina 19